柳工装载机855拆发动机

To disassemble the engine of a LiuGong Wheel Loader 855, you will need the following steps:

1. Ensure that the engine is turned off and the equipment is in a safe position.

2. Disconnect the battery cables to prevent any accidental starts or electrical shocks.

3. Drain the engine coolant by opening the radiator drain valve and collecting the coolant in a suitable container.

4. Drain the engine oil by removing the drain plug at the bottom of the engine oil pan and allowing the oil to flow into a suitable container.

5. Remove the air filter housing by loosening the clamps and disconnecting any electrical or vacuum connections.

6. Disconnect the fuel lines from the fuel filter and fuel injectors, being careful to catch any fuel that may spill.

7. Remove the exhaust manifold by loosening the bolts and disconnecting any connections to the engine block.

8. Disconnect the wiring harness and any electrical connections from the engine.

9. Remove the engine mounts by loosening the bolts and carefully lifting the engine from the frame of the wheel loader.

10. Carefully lift the engine out of the wheel loader, ensuring that it is properly supported and does not cause any damage.

Note: It is recommended to consult the manufacturer's manual or seek professional assistance when performing engine disassembly on heavy machinery to ensure safety and proper procedures.